Parkvale South Prospect Returns 22.2g/t Au Rock Chip
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
21 May 2025
ASX: ADD
Parkvale South Prospect Returns 22.2g/t Au Rock Chip
• Recent reconnaissance work at Parkvale South and Welcome Mine Prospects at the
Parkes Project in NSW has returned significant gold assay results from rock chips.
• Parkvale South Prospect is a newly defined and underexplored area of interest located
between historical prospects within a highly prospective structural zone of probable
magnetite destruction that has returned a high-grade assay result of 22.2g/t Au (P24688).
• Parkvale South Prospect considered a priority by Adavale with a similar geological setting
and vein/alteration style to Alkane’s (ASX:ALK) Tomingley Mine (1.5Mt Au Resource1).
• Soil geochemistry grid to be planned for Parkvale South in Q2, potentially leading to
detailed magnetics and IP survey to further assist in delineating drill targets.
• The Welcome Mine area is the location of an historic underground mine and returned
gold assays including 1.61g/t Au (P24702) and 0.647g/t Au (P24702).
Figure 2: Sample P24688 - 22.2g/t Au
Figure 1: Geochemical Sampling
Adavale Resources Executive Chairman and CEO, Mr. Allan Ritchie, commented:
“Adavale is continuing its systematic and methodical approach to target generation and prospect
evaluation. The Parkvale South prospect is considered a prime target due to its geological setting being
similar to Tomingley, which is now supported by an outstanding rock chip assay result of 22.2g/t Au.
Adavale has significant news flow emanating from the field work over the last months and will be used
to define our initial prospect for a drilling campaign which is on track for Q2 2025.”
1
Alkane Resources Ltd – Denver gold Forum Europe Presentation 2/4/2025 (https://alkane.com.au/investors/presentations-reports/)
Directors & Officers
Adavaleresources
ALLAN RITCHIE
NIC MATICH
Executive Chairman & CEO
Non-Executive Director
AdavaleL
Investors@adavaleresources.com
DAVID WARD
LEONARD MATH
Non-Executive Director
CFO & Company Secretary
www.adavaleresources.com
+61 2 8003 6733
Adavale Resources Limited
Level 2, 49 Oxford Close
West Leederville, WA, 6007
\
Adavale Resources Limited (ASX:ADD) (“Adavale” or the “Company”), an Australian junior
explorer focused on gold and copper in the Lachlan Fold Belt of New South Wales, is pleased to
provide an update on the Company’s exploration activities at the Parkes Project in central-western
NSW.
Recent reconnaissance investigation by Adavale at the Parkvale South and Welcome Mine areas
(Figure 3 and Figure 4) has returned significant gold rock chip assay results, including one high
grade result at the newly targeted Parkvale South prospect:
•
22.2g/t Au (P24688) – Parkvale South
•
1.61g/t Au (P24702) – Welcome Mine
•
0.647g/t Au (P24702) – Welcome Mine
The Parkvale South prospect is a newly defined area originally targeted from recent desktop
technical review by the Company and is located within an identified wider area of interest between
the historic Hazelbank and Parkvale prospects. Of particular interest, and verified now by the highgrade gold result, is a zone of interpreted magnetite destruction likely hosted in Ordovician
volcanic rocks, which is located within a slightly ovoid shaped, north-south trending kink zone
oblique to the overall north-northeast trending structural grain of the wider area (Figure 3).
The recent reconnaissance records that outcrop is unfortunately sparse to non-existent in what is
becoming the main area of interest, approximately 1km south-southwest of the historical Parkvale
prospect. However, float sampling of a variety of material in and around this zone, including highly
altered host rocks reveals a variety of stockworked through to sheeted vein styles. Sampled
quartz±carbonate veins with laminated to crack-seal and open spaced filling textures are
sometimes accompanied by floats of non-magnetic, strongly to intensely quartz-sericite-pyrite(carbonate) altered, mostly andesitic volcanic rocks. Further sampling at Parkvale South more
focused on very likely mineralised quartz (carbonate) vein material should replicate the currently
sole high-grade sample collected from initial work by Adavale. Preliminary interpretation of the
mineralisation style and structural setting suggests it is most likely oregenic in nature, and
therefore at least partly analogous to the nearby Tomingley deposits.
The Welcome Mine is an historical mine located within 5km of Parkes township that had and
average reported head grade of 11g/t Au2 that is untested by drilling for continuation along strike,
or at depth. Inspection of the site and surrounds resulted in the collection of two samples of likely
lode quartz vein that returned a best result of 1.61g/t Au. This prospect will require further
investigation and checking of the historical records to enable potential future drill targeting.
Agricultural Equity Investments Pty Limited. EL8830, First Annual Exploration Report, “About 4.84km NE of Parkes
Project”, Covering Period 13 April 2019 to 12 April 2020. (Geoscience NSW database [DIGS] report RE0012838
[GS2020/0571]).
2
2
Demagnetised
structural zone
Figure 3: Parkvale South Prospect rock chip locations over TMI RTP Image
Next Steps at the Parkes Project
Multiple ongoing exploration efforts continue to take place at the Parkes Project simultaneously,
with key projects and milestones including:
•
Geochemical Assays and Interpretation of Results Pending:
o
279 grid-based soil samples and a total of 19 rock chips from Ashes Myalls
geochemical survey.
•
Further Geochemical Survey Planning: Identification of future targets for geochemical
work to take place simultaneously with other activity; Parkvale South becoming a high
priority dependent on results of further rock chip sampling.
•
Drill Program Planning: Adavale’s maiden drilling program is anticipated in Q2 CY2025,
following assessment of existing and expected new target generation from geochemical
survey assay results and the current IP reprocessing.
•
Exploration Target from London-Victoria: Stemming from the recent JORC 2012 Mineral
Resource Estimate (MRE); expected outlining of a range of potential additional tonnes and
grade of the deposit outside of the area of the current MRE.
•
Further Prospect Reconnaissance: Visits to additional targets being planned for future
reconnaissance efforts, including additional areas on No Mistake (EL8830) and an initial
visit to The Dish (EL9711), as well as the Northern Areas of Front Gate (EL8831).
3
Demagnetised structural zone
London Victoria Mine
3.14Mt @ 1.06g/t Au
for 107koz Au
Figure 4: Best Rock Chip Assay Results Plotted Against Total Magnetic Intensity RTP Image.
4
This announcement is authorised for release by the Board of Adavale Resources Limited.
Further information:
Allan Ritchie
Executive Chairman and CEO
Adavale Resources
E: investor@adavaleresources.com
P: +61 2 8003 6733
Jane Morgan
Media and Investor Inquiries
Jane Morgan Management
E: jm@janemorganmanagement.com.au
P: +61(0) 405 555 618
Forward Looking Statements
Certain statements in this announcement are or may be “forward-looking statements” and
represent Adavale’s intentions, projections, expectations, or beliefs concerning among other
things, future exploration activities. The projections, estimates and beliefs contained in such
forward-looking statements don’t necessarily involve known and unknown risks, uncertainties, and
other factors, many of which are beyond the control of Adavale Resources, and which may cause
Adavale Resources actual performance in future periods to differ materially from any express or
implied estimates or projections. Nothing in this announcement is a promise or representation as
to the future. Statements or assumptions in this announcement as to future matters may prove to
be incorrect and differences may be material. Adavale Resources does not make any
representation or warranty as to the accuracy of such statements or assumptions.
Competent Persons Statement
The information in this announcement that relates to Exploration Targets and Exploration Results,
is based on information compiled by Barry Willott, who is employed by Desdinova Metals Pty Ltd
as consultant to Adavale Resources Ltd. Mr Willott is a Member of The Australian Institute of
Geoscientists (AIG) and The Australasian Institute of Mining and Metallurgy (AusIMM). Mr Willott
has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in
the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Willott consents to the inclusion in the presentation of the matters based
on his information in the form and context in which it appears.
Information on the Mineral Resource estimate at the London-Victoria Gold Project, together with
JORC Table 1 information is contained in the ASX announcement dated 5 May 2025 titled “Maiden
JORC Resource at London-Victoria Project”.
Where the Company refers to Mineral Resource estimate in this announcement (referencing
previous releases made to the ASX), it confirms that it is not aware of any new information or data
that materially affects the information included in that announcement and all material
assumptions and technical parameters underpinning the Mineral Resource estimate with that
announcement continue to apply and have not materially changed. The Company confirms that
the form and context in which the Competent Persons findings are presented have not materially
changed from the original announcement.
5
Overview of The Parkes Project: A World-Class Geological Setting
The Parkes Project comprises four granted exploration licences (EL’s) that cover a total area of
~354.15 km² strategically located within the Macquarie Arc of the Lachlan Fold Belt – a Tier-1 mining
jurisdiction. The region hosts world-class operations such as Cadia Ridgeway (35.1Moz Au &
7.9Mt Cu) and Northparkes (5.2Moz Au & 4.4Mt Cu), adjacent and directly west of the Parkes
Project.
Figure 5: Map of the central New South Wales Lachlan Fold Belt
6
ABOUT ADAVALE RESOURCES
Exploring for Gold and Copper in the NSW Lachlan Fold Belt, Uranium in South Australia, and Nickel
Sulphide in Tanzania.
The Parkes Project
Adavale Resources Limited (ASX:ADD) holds a
72.5% interest in the Parkes Gold and Copper
Project, consisting of four granted exploration
licences that are highly prospective for Au-Cu,
primarily due to their location adjacent the
giant Northparkes copper-gold mine and
encompassing the Ordovician-aged rocks of
the Macquarie Arc, within the crustal-scale
structure of the Lachlan Transverse Zone (LTZ)
that contain both Northparkes and the worldclass Cadia gold-copper Mine. A JORC Inferred
Mineral Resource Estimate of 115koz Au
defined at the London-Victoria Gold Project.
Within this estimate there is a higher-grade
mineralised total of 3.14Mt at 1.06g/t Au for
107koz.
South Australian Uranium Portfolio
Adavale also holds seven granted exploration
licences that are prospective for their
sedimentary uranium potential within the
northern part of the highly- prospective
Northern outwash from the Flinders Ranges
in South Australia, as well as four exploration
licence applications east of Ceduna on the
Eyre Peninsula increasing Adavale’s uranium
tenement holdings including to include
uranium rights to 4,959km2.
The Kabanga Jirani Nickel Project
Adavale also holds the Kabanga Jirani Nickel
Project, a portfolio of twelve highly
prospective granted licences along the
Karagwe-Ankolean belt in Tanzania. The nine
southernmost licences are proximal to the
world class Kabanga Nickel Deposit (87.6Mt @
2.63% Ni Eq). Adavale holds 100% of all
licences except for two licences that are
known as the Luhuma-Farm-in, which are held
at 65%, adding a further 99km2 and bringing
the portfolio to 1,315km2. Adavale’s licences
were selected based on their strong
geochemical and geophysical signatures from
the previous exploration undertaken by BHP.
7
Appendix 1 – Rock Chip Summary
Table 1: Rock chip summary (all coordinates in MGA94 / UTM Zone 55S) (BDL = Below Detection Limit)
Sample
Prospect
Easting
Northing
Au (g/t)
Cu (ppm)
Ag (g/t)
As (ppm)
Sb (ppm)
Mo (ppm)
P24679
P24680
P24681
P24682
P24683
P24684
P24685
P24686
P24687
P24688
P24689
P24690
P24691
P24692
P24693
P24702
P24703
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Parkvale South
Welcome
Welcome
611313
611956
611961
611111
611517
611651
612499
613113
613116
613149
612988
612916
612725
612609
613147
608053
608060
6339329
6339643
6339794
6339977
6340508
6340213
6341186
6341251
6341145
6341024
6341090
6341075
6340946
6340798
6340651
6328372
6328660
0.005
BDL
BDL
BDL
BDL
BDL
BDL
0.008
0.008
22.2
0.005
BDL
0.029
0.044
BDL
0.647
1.61
31.6
48.3
46.3
4
67.3
56.4
14
77.2
5
18.2
6.3
43.6
35.6
23.9
54.1
72.8
11.1
0.02
0.03
0.03
BDL
0.02
0.01
0.01
0.04
BDL
0.18
0.02
0.03
0.02
0.05
0.03
0.87
0.08
3.8
4.4
4.7
2.6
3.4
7.2
1.8
5.2
1.4
13.6
2.4
3.7
3.5
1.9
4.2
438
3.6
0.8
0.45
0.55
0.81
0.34
0.65
0.85
0.41
1.24
2.73
1.47
0.41
0.91
0.56
1.5
14.8
1.08
1.38
1.06
0.73
0.51
0.5
0.98
0.41
0.91
0.25
1.65
0.17
0.76
5.81
7.75
0.48
0.32
0.41
8
Appendix 2 – JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling
techniques
•
•
•
•
Commentary
Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised
industry standard measurement tools appropriate to the minerals under investigation,
such as downhole gamma sondes, or handheld XRF instruments, etc.). These examples
should not be taken as limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report.
In cases where ‘industry standard’ work has been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may
be required, such as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant
disclosure of detailed information.
•
Adavale rock chip samples were selected by the geologist for gold and multi-element assay from
random chips. Typically, samples collected were between 1kg and 3kg in weight from outcrop, subcrop
and float.
Drilling
techniques
•
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what
method, etc.).
•
No drilling completed.
Drill sample
recovery
•
•
Method of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the
samples.
Whether a relationship exists between sample recovery and grade and whether sample
bias may have occurred due to preferential loss/gain of fine/coarse material.
•
No drill samples have been taken.
Whether core and chip samples have been geologically and geotechnically logged to a
level of detail to support appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant intersections logged.
•
•
No drilling completed.
Geological observations are both preliminary and qualitative. The information contained within
describes only dominant outcrop lithologies at discreet locations, and minerals of interest.
All data is stored in digital format for use in GIS software packages.
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or
dry.
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling is representative of the in situ material
collected, including for instance results for field duplicate/second-half sampling.
•
•
•
Logging
•
•
•
Sub-sampling
techniques and
sample
preparation
•
•
•
•
•
•
Rock chip sampling only
The sample size and medium are considered appropriate for the purpose of outlining surface
geochemical anomalies.
9
Criteria
Quality of assay
data and
laboratory tests
JORC Code explanation
•
Whether sample sizes are appropriate to the grain size of the material being sampled.
•
The nature, quality and appropriateness of the assaying and laboratory procedures used
and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters
used in determining the analysis including instrument make and model, reading times,
calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias)
and precision have been established.
•
The verification of significant intersections by either independent or alternative company
personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
•
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys),
trenches, mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
•
•
All coordinates are based on Map Grid Australia Zone 55S, Geodetic Datum of Australia 1994.
All reported locations are assumed to have a +/- 5m accuracy via use of handheld GPS instruments.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
•
•
Data points are guided by field outcrops instead of a grid based spacing.
Exploration data contained within is not appropriate for calculating Mineral Resources.
Insufficient exploration has been completed at this stage to warrant such calculations. •
No compositing of results has been reported in this announcement.
•
•
•
Verification of
sampling and
assaying
•
•
•
•
Location of data
points
•
•
•
Data spacing
and distribution
Commentary
•
•
•
•
•
•
Rock chip samples were sent to ALS (Orange) for analysis using gold by fire assay (Method AuAA24; 50g sample) and a four acid digestion followed by ICP-MS analysis (Method ME-MS61)
Sample P24688 was re-assayed for gold by fire assay AAS finish (Method Au-AA26). To ensure
industry standard Quality Control / Quality Assurance (QA/QC) 10 Standard, 5 Blanks and 2
Repeats were inserted by ALS.
No data verification has occurred but details and information is relayed from historical
exploration reports held by the NSW Government in their on-line DIGS system.
The Company has verified the presence of historically reported outcrop lithologies during the
reconnaissance phase of exploration works.
Field observation and sample points are guided by outcrop location at a reconnaissance stage
of on-ground exploration.
At the current stage of exploration no specific orientation of mineralisation is known and
therefore no relationship of key mineralised structures between outcrop mapping sites is
established at present.
Orientation of
data in relation
to geological
structure
•
•
Whether the orientation of sampling achieves unbiased sampling of possible structures
and the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key mineralised
structures is considered to have introduced a sampling bias, this should be assessed and
reported if material.
Sample security
•
The measures taken to ensure sample security.
•
Adavale Resources and its geological consultants retained possession of all samples until they
were hand delivered to the external ALS laboratory.
Audits or reviews
•
The results of any audits or reviews of sampling techniques and data.
•
No audits or reviews have been conducted at this stage.
•
10
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
tenement and
land tenure
status
•
•
Type, reference name/number, location and ownership including agreements or
material issues with third parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites, wilderness or national park and
environmental settings.
The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
Commentary
•
•
•
•
The historic data referred to in Section 1 of this Table, and separately in Appendix 1, are located
within EL8830, part of the Parkes Project which comprises ELs 8831, 8830, 7274 and 9711.
All tenements are subject to a JV agreement between Adavale and the tenements’ vendor,
Agricultural Equity Investments Pty Ltd (“AEI”). Adavale owns 72.5% of the tenements and is the
operator of the JV with the remaining 27.5% interest held by AEI.
EL’s 7242, 8831, 8830 and 9711 have been renewed and are in good standing, with expiry dates
on or after 12 April 2027.
Community Consultation Management Plans for all ELs will be developed as appropriate for the
proposed exploration activity.
Exploration done
by other parties
•
Acknowledgment and appraisal of exploration by other parties.
•
Exploration of the 395km2 Parkes Project has taken place since before 1900 by parties too
numerous to mention here. In recent decades, significant exploration overlapping parts of ELs
8831, 8830, 7274 and 9711 has been undertaken by Alkane, BHP Gold, Newcrest Mining,
AngloGold Ashanti, FMG, Geopeko, Hargraves Resources, Golden Cross Resources, Meridian
Minerals, Michelago Resources, Gold and Copper Resources and Agricultural Equity Investments.
Geology
•
Deposit type, geological setting and style of mineralisation.
•
The Parkes Project is located in the central NSW Lachlan Fold Belt at the intersection of the northwest trending, Middle Ordovician-age Lachlan Transverse Zone with the north-striking, Early
Ordovician, andesitic Junee-Narromine Volcanic Belt and adjacent Silurian sediments. This
tectono-stratigraphic setting is prospective for orogenic gold as evidenced by the Project’s
London-Victoria deposit and for porphyry-hosted copper-gold mineralisation by virtue of its
proximity to the giant Northparkes copper-gold porphyry deposit.
Drill hole
Information
•
A summary of all information material to the understanding of the exploration results
including a tabulation of the following information for all Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level in metres) of the drill
hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
If the exclusion of this information is justified on the basis that the information is not
Material and this exclusion does not detract from the understanding of the report, the
Competent Person should clearly explain why this is the case.
•
No drillholes are currently reported.
In reporting Exploration Results, weighting averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually
Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade results and longer
lengths of low grade results, the procedure used for such aggregation should be stated
and some typical examples of such aggregations should be shown in detail.
•
•
•
No data aggregation has been applied.
No resource evaluation has been undertaken.
Metal equivalent values are not reported.
•
Data
aggregation
methods
•
•
11
Criteria
JORC Code explanation
Commentary
•
The assumptions used for any reporting of metal equivalent values should be clearly
stated.
Relationship
between
mineralisation
widths and
intercept lengths
•
•
These relationships are particularly important in the reporting of Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle is known, its
nature should be reported.
If it is not known and only the down hole lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole length, true width not known’).
•
•
No drilling results are reported.
Rock chip sampling only reported.
Diagrams
•
Appropriate maps and sections (with scales) and tabulations of intercepts should be
included for any significant discovery being reported These should include, but not be
limited to, a plan view of drill hole collar locations and appropriate sectional views.
•
Figures and plans are displayed in the main text of the release.
Balanced
reporting
•
Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration Results.
•
All rock chip sample sites and a summary of assay results from the current reconnaissance stage
of exploration are listed in Appendix 1.
Other
substantive
exploration data
•
Other exploration data, if meaningful and material, should be reported including (but
not limited to): geological observations; geophysical survey results; geochemical
survey results; bulk samples – size and method of treatment; metallurgical test results;
bulk density, groundwater, geotechnical and rock characteristics; potential deleterious
or contaminating substances.
•
Description of the work completed and the results are included in the historical reports of which
an overview is provided in this document.
Further work
•
The nature and scale of planned further work (e.g. tests for lateral extensions or depth
extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including the main
geological interpretations and future drilling areas, provided this information is not
commercially sensitive.
•
See planned activity in this Announcement.
•
•
12
Share your feedback
Discover